www.V8TVshow.com - 1966 GTO

CONATACT V8TV

Click For Info
To Learn How
V8TV Can Build
Your Dream Car!

FOLLOW V8TV

HOME / LATEST VIDEO

Project Cars

1965 Chevelle

1966 GTO - Have A Seat!

This car is going to be driven ALOT, so it had to be comfortable... check out how Nick Doerr adapted some 2005 GTO seats to the '66 and how they remained fully operational.

Discuss this project in the V8TV Forum!

DISCLAIMER: Demonstrations and procedures contained in the V8TV show or website may not provide all necessary or relevant information. Applicable local laws and regulations may vary and should be checked before any project is commenced. Be sure to follow all applicable safety procedures. V8TV Productions, Inc. makes no warranties, expressed or implied, as to the completeness, accuracy, or practicality of any such demonstration or procedure or any information with respect thereto contained in the preceding program. C. 2008, V8TV Productions, Inc.

Share this link on your favorite social network!

» 3 Comments

3Comment
at Friday, 13 March 2009 18:16by Evan

Do you have any more detailed pictures or description on this, I am planning on doing the same thing in my 66 but with rear seats also. What did you do about seat belts?

2"fabricator"
at Sunday, 01 June 2008 18:21by Nick Doerr

Making the mounts for seat belt bolts should work if you are relocating seat belts and they are easy to make. As long as they are tightly welded to the floor it should be safe.

1Comment
at Friday, 30 May 2008 00:14by Ausgoat

Nice idea !
Would the seat mounts be set up like what you would do if you are changing the seatbelt mounts. Larger plate on the outside with a higher tenstile bolt.
If you have any blogs on such a project that would be helpful.

Ausgoat

» Post Comment

Only registered users can write a comment.
Please login or register.