Welcome to the boards!

[Nitrofish72]

Hello V8TV forum, my name is Jaime and I am working on a 70 GTO.  I am trying to decide which route to take in regards to my engine rebuild.  I want it fuel injected and turbo/supercharged. Would it be more cost efficient to build my existing 400 or buy a 6.0L and work from there.  All comments welcomed.

[Qball]

Hello V8TV forum, my name is Jaime and I am working on a 70 GTO.  I am trying to decide which route to take in regards to my engine rebuild.  I want it fuel injected and turbo/supercharged. Would it be more cost efficient to build my existing 400 or buy a 6.0L and work from there.  All comments welcomed.

Got any pics?  I likes me a 70 GTO.  My opinion (what ever that's worth) is to build your 400.  I'm not a purist snob but I like seeing a Pontiac V8 in a classic Pontiac. 

[Killrbuick66455]

Hello All,My name is Eric and I own a 66 Buick skylark with a 455 Its bin a long project 12 years (yeah i know) Ill get some pics up so Everyone can comment..Nice to meet you all and looking to meet new friends here !!!      




Eric

[Kevin O]

Hey Eric,

Welcome to the board!    We've got lots of Buick fans here (including meself) so we'd like to see your '66!

[Anders H]

Hi

My name is Anders and I live in the northern of Sweden.
I like your video and have learned me a lot... hope to learn me a lot on the forum also.


My cars
De Tomaso Pantera GR3 -75 (factory built race Pantera only 26 built)
Ford Capri -77
Volvo PV 544 -58

[Kevin O]

Welcome Anders!    Cool Pantera, can you post more pics?

[Anders H]

GR3 Pantera

[Kevin O]

Nice!   I never really looked at the shifter linkage on one of those cars.. I bet it's tricky to get adjusted properly!

[Anders H]

It is not difficult but a bit tricky; there is a turnbuckle on the side of the ZF.
"only" to adjust so the gear stick is in the middle of the gate and tighten the nuts without    the gear stick is moved.
a very small movement on the turnbuckle is quite a change at the gear stick.

it is difficult to find good (non overbore) 351 cleveland around where you live?
expensive?

Anders

[Kevin O]

I have a couple sources I can ask for a good Cleveland block if you're interested.   

[Anders H]

yes, I am interested, of blocks or complete engines.

Thanks
Anders