file Supercharged 1969 Camaro ZR9

More
14 Dec 2014 15:07 #140 by oestek
oestek replied the topic: Supercharged 1969 Camaro ZR9
The rear wing it was modified with fiberglass and molded to fit closer to the deck lid and quarter panels. 












Kevin Oeste
Subscribe to our YouTube Channel: goo.gl/RIkdDS

Please Log in or Create an account to join the conversation.

More
14 Dec 2014 15:07 #141 by oestek
oestek replied the topic: Supercharged 1969 Camaro ZR9
After the crew was satisfied with the straightness of the body filler, the ZR9 it was rolled into the paint booth for several coats of Evercoat Super Build 4:1 sprayable polyester filler.
















Kevin Oeste
Subscribe to our YouTube Channel: goo.gl/RIkdDS

Please Log in or Create an account to join the conversation.

More
14 Dec 2014 15:08 #142 by oestek
oestek replied the topic: Supercharged 1969 Camaro ZR9
After the sprayable polyester is block sanded using a guide coat, the body panels seam sealed to prevent moisture from getting between the overlapping panels.












Kevin Oeste
Subscribe to our YouTube Channel: goo.gl/RIkdDS

Please Log in or Create an account to join the conversation.

More
14 Dec 2014 15:08 #143 by oestek
oestek replied the topic: Supercharged 1969 Camaro ZR9
The straightened panels were hung in the spray booth for a coat of high build primer.







The backside of the panels were then masked and sprayed with black Imron. 






Kevin Oeste
Subscribe to our YouTube Channel: goo.gl/RIkdDS

Please Log in or Create an account to join the conversation.

More
14 Dec 2014 15:08 #144 by oestek
oestek replied the topic: Supercharged 1969 Camaro ZR9
The body shell was then moved into the paint booth, masked, and the exterior was primed.







The inside was sanded and prepped for black Imron.    The interior, roll cage, dash, and firewall were all blacked out next.








Kevin Oeste
Subscribe to our YouTube Channel: goo.gl/RIkdDS

Please Log in or Create an account to join the conversation.

More
14 Dec 2014 15:08 #145 by oestek
oestek replied the topic: Supercharged 1969 Camaro ZR9
Next the crew mixed up some of the jet stream blue to make a spray out card. The color looks outstanding in the sun!    This is a color available on a late-model ZR1 Corvette, so it was a natural for the ZR9 Camaro.





The body shell was then sprayed with guide coat, and all the parts were wet sanded smooth to 600 grit in preparation for color.








Kevin Oeste
Subscribe to our YouTube Channel: goo.gl/RIkdDS

Please Log in or Create an account to join the conversation.

Time to create page: 0.171 seconds
Powered by Kunena Forum