file Supercharged 1969 Camaro ZR9

More
14 Dec 2014 15:08 #146 by oestek
oestek replied the topic: Supercharged 1969 Camaro ZR9
We sprayed Standox base coat and clear on the exterior panels.











The inner fenders were sprayed with Imron and the undersides were sprayed with 3M Body Protection System. 




Kevin Oeste
Subscribe to our YouTube Channel: goo.gl/RIkdDS

Please Log in or Create an account to join the conversation.

More
14 Dec 2014 15:09 #147 by oestek
oestek replied the topic: Supercharged 1969 Camaro ZR9
The body was rolled into the paint booth to spray color on all of the jamb areas.



The backsides of fenders, doors, the wing, under hood area, and trunk jambs were all mask and painted Jetstream Blue and clear coated.










Kevin Oeste
Subscribe to our YouTube Channel: goo.gl/RIkdDS

Please Log in or Create an account to join the conversation.

More
14 Dec 2014 15:09 #148 by oestek
oestek replied the topic: Supercharged 1969 Camaro ZR9
The body panels were carefully reassembled on the car with the weatherstrip and inner fenders. 








Kevin Oeste
Subscribe to our YouTube Channel: goo.gl/RIkdDS

Please Log in or Create an account to join the conversation.

More
14 Dec 2014 15:09 #149 by oestek
oestek replied the topic: Supercharged 1969 Camaro ZR9
Next, the LS7 engine was stripped of bolt ons, chemically cleaned, and sprayed with and Eastwood high temp ceramic silver engine paint. This was done to preserve the aluminum look, and it will not discolor from heat or oxidize. 








Kevin Oeste
Subscribe to our YouTube Channel: goo.gl/RIkdDS

Please Log in or Create an account to join the conversation.

More
14 Dec 2014 15:09 - 14 Dec 2014 15:09 #150 by oestek
oestek replied the topic: Supercharged 1969 Camaro ZR9
During the wet sanding process, the crew noticed a few areas which did not appear to be as straight as they could be, so the Camaro was quickly treated to another coat of sprayable polyester, guide coated, and blocked once again.  Primers are not shiny, so it is hard to see how reflections will appear after the car has been painted, clearcoated, and buffed smooth.   A large board with stripes printed on it was used to verify a straight reflection in the body panels.










Kevin Oeste
Subscribe to our YouTube Channel: goo.gl/RIkdDS
Last Edit: 14 Dec 2014 15:09 by oestek.

Please Log in or Create an account to join the conversation.

More
14 Dec 2014 15:10 #151 by oestek
oestek replied the topic: Supercharged 1969 Camaro ZR9
Next, the car was cleaned, masked, and rolled into the baking paint booth for exterior color and clearcoat. We were very excited to see the results!
















Kevin Oeste
Subscribe to our YouTube Channel: goo.gl/RIkdDS

Please Log in or Create an account to join the conversation.

Time to create page: 0.151 seconds
Powered by Kunena Forum